Features
- Supports resolutions up to 3840×2160@60Hz 4:4:4 8bit, with support for HDR10.
- Each set includes one Transmitter wall plate with loop out and one Receiver.
- Supports Dual Way PoC.
- Extension distance up to 70m for 4K@60Hz / 1080P@60Hz.
- Supports Local EDID or Remote EDID Copy or Built-In EDID. (4K@60Hz 4:4:4).
- HDCP1.x / 2.2 compliant.
- The Transmitter wall plate is designed to be mounted on a one-gang junction box.
- HDMI audio pass-through supports 7.1CH and audio sampling rate supports 192kHz.
- Toslink (Optical) digital audio port supports 5.1CH and audio sampling rate supports 96kHz / 3.5mm analog audio port supports 2.0CH and audio sampling rate supports 96kHz.
- Supports Dolby®, TrueHD, DTS-HD®, & Master Audio™, multi-channel, & stereo etc.
- Supports IR pass-through.
Description
The WST-PEX006 Extender Kit is a simple to use plug and play solution which lets the user extend HDMI signals up to 70m using a single Cat.6 UTP cable (not included). The Transmitter wall plate meets USA standard installation requirements.
The Extender supports HDMI 2.0 18G specification that allows the transmission of 4K Ultra HD resolutions. It also supports High-Dynamic Range which enable video content to be seen with enhanced brightness, greater contrast of black and white and a much wider colour gamut. This Extender is a perfect solution for an immersive home cinema experience.
The Extender features an HDMI loop-through output on the Transmitter wall plate which allows for simultaneous viewing using local and remote displays. The built-in EDID dip switch enables the user to control the acceptance of EDID from local or remote display, ensuring maximum compatibility with different HDMI displays and projector formats. Bi-Directional PoC allows for both power and data signals over a Cat.6 cable in a point-to-point configuration, this provides flexibility as only one power supply is required for both the Transmitter and the Receiver. This is ideal when power outlets are limited in the installation environment.
The Extender also has separate optical and 3.5mm audio ports to extract audio from HDMI signals for non-HDMI amplifiers or soundbars, making it ideal for supporting video with immersive multichannel audio.
Featuring IR pass-through, the source equipment can be seamlessly controlled from the remote display side of the installation using compatible infrared remote controls.
Package Contents
US Wall Plate 1-Gang Transmitter x 1
Receiver x 1
12V/1A Multi-Country Power Adapter x 1
IR Emitter x 1
IR Receiver x 1 |
Ear Mounts x 2
Screws Pack x 1
Specification
Interface
Transmitter
Inputs:HDMI Type-A (Female) x 1
Outputs:HDMI Loop out Type-A (Female) x 1 | RJ45 (Female) x 1 |IR-Out slot x 1
USB:Micro USB port: for firmware upgrading
Power:2PIN Phoenix port, supports PoC
Receiver
Inputs:RJ-45 (Female) x 1 | IR-In slot x 1
Outputs:HDMI Type-A (Female) x 1
USB:Micro USB port: for firmware upgrading
Audio:HDMI Audio by pass supports 7.1 CH and audio sampling rate supports 192kHz
Toslink digital audio port supports 5.1 CH and audio sampling rate supports 96kHz
3.5mm analog audio port supports 2.0 CH and audio sampling rate supports 96kHz
Power:5.5 / 2.1 mm with screw Slot, supports PoC
Transmission
HDMI Compliant:HDMI2.0b
HDCP Compliant:2.2 / 1.4
IR Frequency:38-56 kHz
Output Resolution (Max.):3840×2160@60Hz
Power
Power Supply:12V/1A DC (Select one side for power-on)
Max. Power Consumption:4.8W
Product Structure
TX Main Material:Aluminum
TX Size W x D x H:69.6 x 114.8 x 42.4 mm
Weight:144g
RX Main Material:Iron
RX Size W x D x H:75.8 x 72.2 x 18mm
Weight:152.6g
Environment
Operating Temperature:-5˚C～40˚C
Storage Temperature:-20˚C～60˚C
Certification
Safety & Emission:CE / FCC / RoHS / REACH
Country of Origin
China
